Overview

CTS was invited by the Accommodation Vessel Owner/operator to provide one Rope Accesswelding 6G team and two teams of R/A U.H.P. blasters & painters, for renewal of braces on the PS and SBS crane boom under the supervision and instructions of the maker’s FavelleFavco. The R/A blasting and coating team was to descale the crane boom mechanically, clean chemically / U.H.P. W. Jet blasting, and then paint with 2 coats of primer and yellowtop coat. CTS provided all the R/A equipment, consumables, and equipment required for the blasting and coating teams. The team was handpicked from our pool of skilled ex-shipyard pipe and steel fitters/welders with very good knowledge and relevant certificates. Experienced Blasting/Coating teams were deployed for the project

Result

The project was delivered safely, within time and quality to the Client

Overview

Our Client called upon CTS to analyze and provide a solution for the HVAC issues faced on-board their jack-up rig. CTS provided expertise with certified personnel to give customised EPC solutions within Clients’ time frame.

The three main affected areas were:
• Transformer room: in peak summer in Arabian Gulf, the transformer room temperature was reaching higher than the stipulated operating conditions.
• Galley System: in peak summer, with outside temperature reaches 48C, the temperature inside the galley was affecting working conditions.
• PLC Room : Cooling was found insufficient upon inspection condenser was found with several damages to the condenser fins and areas rusted obstructing the optimum heat exchange

Result

The works were completed and tested to the satisfaction of the C/E well within time and in concurrence to the other SIMOPS shipyard works

Overview

CTS was called upon to provide painting and maintenance services for the top deck of three offshore wind HV transformer platforms located in the North Sea, off the coast of Germany.
The platforms were situated in a harsh corrosive environment and also had a heavy workload of container movements. The wear and tear caused by these severe conditions meant that these platforms had to undergo regular maintenance, including a new layer of protective coating and paint. It is, for this reason, the client, a major European electricity transmission system operator, entrusted CTS to conduct this task, safely, and in a cost-effective manner.

Result

Despite the stringent travel measures due to the COVID-19 outbreak, CTS was quickly able to assemble a qualified team to complete the work on each platform within the two-month time frame. Each team built a climate-controlled habitat around the work area, to ensure the ideal conditions were maintained throughout the preparation and coating process. The Client was pleased with the CTS team’s competence and attention to detail.